前言：
而今姐妹们对“debian多ip配置”大体比较看重，各位老铁们都想要分析一些“debian多ip配置”的相关文章。那么小编在网上网罗了一些有关“debian多ip配置””的相关文章，希望小伙伴们能喜欢，你们一起来学习一下吧！切到root下
su - root
root@k8s-master:~# ifconfig
ens3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.100.8 netmask 255.255.255.0 broadcast 192.168.100.255
inet6 fe80::2a0:98ff:fe0b:1698 prefixlen 64 scopeid 0x20<link>
inet6 fd67:bcb8:5ea8:0:2a0:98ff:fe0b:1698 prefixlen 64 scopeid 0x0<global>
inet6 2408:8270:446:8610:2a0:98ff:fe0b:1698 prefixlen 64 scopeid 0x0<global>
ether 00:a0:98:0b:16:98 txqueuelen 1000 (Ethernet)
RX packets 6122 bytes 861994 (841.7 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 2514 bytes 368874 (360.2 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
发现本地网卡名称为ens3
很多时候会发现debian没法执行ifconfig,那就装一个：
apt install net-tools
vi编辑/etc/network/interfaces,视情况修改及新增如下行，ens3是本地网卡，实际中也可能是其他名称
auto ens3
iface ens3 inet static
address 192.168.100.80
netmask 255.255.255.0
gateway 192.168.100.254
------------------------------------------------------------
vi编辑/etc/resolv.conf.配置dns服务器
nameserver 192.168.100.254
重启网络服务
service networking restart
重新ssh连接，查看ip配置及dns
root@k8s-master:~# ifconfig
ens3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.100.80 netmask 255.255.255.0 broadcast 192.168.100.255
inet6 fe80::2a0:98ff:fe0b:1698 prefixlen 64 scopeid 0x20<link>
inet6 fd67:bcb8:5ea8:0:2a0:98ff:fe0b:1698 prefixlen 64 scopeid 0x0<global>
inet6 2408:8270:446:8610:2a0:98ff:fe0b:1698 prefixlen 64 scopeid 0x0<global>
ether 00:a0:98:0b:16:98 txqueuelen 1000 (Ethernet)
RX packets 6170 bytes 870059 (849.6 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 2536 bytes 372648 (363.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
root@k8s-master:~# nslookup
> 163.com
Server: 192.168.100.254
Address: 192.168.100.254#53
Non-authoritative answer:
Name: 163.com
Address: 123.58.180.8
Name: 163.com
Address: 123.58.180.7
> exit
标签： #debian多ip配置 #debian10 ip配置
